teci home products contact us history philosophy privacy search helpful links weblogo.pnp



Web Album Creator
Windows Control Program for MCPM-3
68HC11 Editor/Assembler for Windows
68HC11 Windows BootMode Software
68HC05 Editor/Assembler for Windows





Ordering Information
Latest Product Versions
Free Downloads
Distributors



Product Revision Record


The page provides users a place to learn about revisions to our products. Compare the revision number posted here with that of your product to determine if an upgrade is available.

HC05 Product HC11 Product
TECICE-HC05 Firmware TECICE-HC11 Firmware
WASM05 WASM11
WTT05 WTT11
MCPM-3 P11
PJ1AG WP11


TECICE-HC05 Firmware Revision History
TECICE-HC05 latest firmware version is 2.6 - Serial communication speed was changed to provide for 10X faster downloads.


WASM05 Revision History
Wasm05.exe Latest Version = 2.41 - Revision Date: 4/11/00 - Fixed a bug that placed the wrong load address in the object code file if the address was greater than or equal to $8000. Example: if the correct address was $8001 then $FFFF8001 was placed in the object code file for the load address. This bug only applied to addresses >= $8000.
Wasm05.exe Previous Version was 2.4


WTT05 Revision History
Wtt05 Latest Version = 2.71 - Revision Date: 5/4/99 - Fixed a bug that prevented proper removal of watch points from the watch window and also fixed a bug that, at times, caused run time integer overflow errors.
Wtt05 Previous Version was 2.7


TECICE-HC11 Firmware Revision History
TECICE-HC11 latest firmware version is 2.6 - Serial communication speed was changed to provide for 10X faster downloads.


WASM11 Revision History
Wasm11.exe Latest Version = 2.51


WTT11 Revision History
Wtt11 Latest Version = 2.71 - Revision Date: 5/4/99 - Fixed a bug that prevented proper removal of watch points from the watch window and also fixed a bug that, at times, caused run time integer overflow errors.
Wtt11.exe Previous Version was 2.7


P11 Revision History
P11 Latest Version = 3.6 - Revision Date: 1/09/98 - Changed serial communications to work with Windows NT.

Previous P11 Versions:
V3.5 made 6/24/96 - added E20 support
V3.4 made 9/19/95 - added object code file checksum display when file is loaded.
V3.3 made 4/26/94 - added K4 support
V2.2 made 12/2/93 - added A1/A8 support
V1.1 made 8/11/93 - added 711D3 support
V1.0 made 6/01/93 - first release for e2 and e9


WP11 Revision History
WP11 is a Windows Version of the P11 bootloader program. WP11 Latest Version = 1.05 - Revision Date: 4/30/2002 - Fixed a bug that caused the MC68HC711E20 device "Load Buffer From Chip" and "Verify Against Chip" functions not to work properly.


PJ1AG Revision History
PJ1AG.EXE PC Program Latest Version = 1.3
Programmer Firmware
4th and Latest Revision - 4/23/99 - Made an option that allows skipping the blank check cycle   before the program and verify cycle. To use hold down the Program Select Switch. at power on.allows reprogramming of chips.

Previous PJ1AG Firmware Versions:
3rd Revision - 12/1/96 - Fixed a bug with blank check and verify only functions where these functions only worked the 1st time used.
2nd Revision - 11/5/96 - Added blank check and verify only functions.
1st Revision and product release - 9/04/96


MCPM-3 Revision History
TMCPM3.EXE PC Control Program Latest Version = 4.5 dated 12/04/99
Fixed the following Windows NT serial communications bug. TMCPM.EXE, only when running in a DOS window under Windows NT, would seem to hang during downloading of data to the MCPM-3 programmer. The hang would clear when the operator pressed any key. The bug would not occur when running the program in full screen DOS mode.

Download TMCPM3.EXE Version 4.5

TMCPM3.EXE Previous Version = 4.4 dated 10/31/97

WMCPM3.EXE Latest Version = 1.0 dated 6/3/2004
Version 1.0 is the first release of this program.

Welcome, you are our 84000th visitor.
This site was last updated on November 21, 2017
© Copyright 1985-2006 TECI - The Engineers Collaborative, Inc.  All Rights Reserved